IMARCS Foundation

Module 34

Propagation, Growth and Long-Term Management

Measuring growth, why and how corals are fragmented safely, mounting and recording frags, growing giant clams, spawning events, a system over the years, and managing growth and change.

Free to read. No account needed.

Sign in

Key terms for this module

Read these first. Every one of them comes up in the sections below.

Propagation Growing new colonies from pieces of existing ones.
Fragmenting (fragging) Cutting or breaking a piece from a coral colony so it grows into a new colony.
Frag A piece cut from a coral colony to grow on its own.
Parent colony The colony a frag is cut from.
Baseline The first measurement or photo that later ones are compared with.
Growth record A dated series of measurements and photos of one animal.
Bone cutters Hand cutters used to cut coral branches.
Coral saw A saw, often a small band saw, for cutting thick coral skeletons.
SPS coral A small-polyp stony coral, such as Acropora or Montipora.
LPS coral A large-polyp stony coral with fleshy heads, such as a brain or torch coral.
Soft coral A coral without a stony skeleton, such as a leather coral or mushroom.
Zoanthid A colonial polyp, including Zoanthus and Palythoa, that can carry palytoxin.
Palytoxin A potentially lethal toxin that some zoanthids and Palythoa carry.
Frag plug A small base, often ceramic, that a frag is glued to.
Cyanoacrylate gel Gel super glue used to attach frags.
Coral dip A bath outside the tank that removes pests from corals (Module 23).
PAR Photosynthetically active radiation: the light available for photosynthesis.
Phytoplankton Tiny photosynthetic algae that drift in the water and are food for filter feeders.
Spawning event Animals releasing eggs and sperm into the water.
Micron filter A filter that catches very fine particles, rated by the particle size in microns.
Alkalinity demand How fast a system uses up alkalinity, mostly through calcifying animals.
Allelopathy Animals releasing chemicals that harm their neighbors.
Poly-Filter A branded chemical filter pad used against allelopathy.

1. Growth, propagation and long-term management

A reef system keeps changing for as long as it runs. Growth, propagation and aging are managed with records and small, steady decisions.

A system over months and years Growth Animals get bigger every month Propagation Corals cut into new colonies Change Demand, crowding, spawning, aging Records The only way to see slow change

Animals in a healthy system grow: clams lengthen their shells, coral colonies spread, anemones get larger. Corals can be cut into new colonies, called propagation. Over months and years the system itself changes too: it demands more supplements as its calcifying animals grow, colonies crowd each other, animals spawn, and equipment wears.

Most of these changes are too slow to see day to day. The only reliable way to know whether an animal is growing, holding steady or shrinking is to measure it the same way at regular intervals and keep the records.

This module covers measuring growth, fragmenting corals safely, growing giant clams, spawning events, and keeping a system healthy over the years.

If Then
Growth Animals get bigger.
Propagation Corals cut into new colonies.
Change Demand, crowding, spawning, aging.

Check your understanding

A clam looks the same size as it did last month. Is it growing?

You can't tell by eye. Only measurements taken the same way at regular intervals show whether it's growing.

Key point Records show slow change.

2. Measuring growth

Growth is measured the same way every time: from above, without lifting anything out of the water, with a ruler in the photo.

Measuring growth Animal How growth is recorded Giant clam Shell length in mm, photo with a ruler Coral colony Widest width in cm, photo with a ruler Anemone Photo only; it can't be measured accurately Fish Not measured; watched, photographed ! Nothing leaves the water Same angle, same spot, ruler in the frame

Nothing leaves the water. Growth is recorded without lifting or removing animals. Take a photo from directly above, from the same spot and angle each time, with a ruler in the frame so the size can be read from the photo.

Giant clams are recorded as shell length in millimeters. Coral colonies are recorded as the widest width of the skeleton in centimeters; the width at right angles to it can be noted too. Anemones can't be measured accurately, because they expand and contract, so they're photographed only, and no size is charted for them. Fish aren't measured, because catching and handling them to measure stresses them; they're photographed and their behavior noted instead.

Regular intervals. Record each animal on the same day each week or month, so the points line up into a trend. One entry is a snapshot; a series of entries shows growth, a stall or a decline. A stall in growth is often the first sign that something has changed.

If Then
Clams Shell length, mm.
Corals Widest width, cm.
Anemones, fish Photos only.

Check your understanding

A coworker lifts a clam out of the water to measure it with calipers. What's the better method?

Leave it in the water. Photograph it from above with a ruler in the frame, from the same spot each time, and read the length from the photo.

Key point Nothing leaves the water.

3. Why corals are fragmented

Corals are fragmented to control space, keep a backup colony, share with others and keep colonies in shape. Only a healthy, growing colony is cut.

Why corals are fragmented Space A colony outgrows its spot Backup A second colony elsewhere Sharing Frags to trade or give Shape Pruning keeps light and flow ! Healthy colonies only Never frag a coral that is stressed or not growing

Fragmenting (fragging) a coral means cutting or breaking a piece, called a frag, from a colony so that it grows into a new colony. The frag can grow into a new colony, and the parent colony heals over the cut (Module 27).

Reasons to frag. A colony outgrows its space and starts touching or shading its neighbors. A second colony in another system is a backup if one is lost. Frags can be traded, given or sold. Pruning keeps a colony's shape open, so light and flow reach all of it.

Healthy colonies only. Fragging is an injury. Only frag a colony that's healthy, colored and growing. If a colony is pale, closed or receding, find and correct the cause first (Module 27); a stressed colony may not recover from the cut.

If Then
Reasons Space, backup, sharing, shape.
Healthy only Colored, growing colonies.
Stressed Fix the cause first.

Check your understanding

A colony has been pale and closed for a week. A coworker wants to frag it before it dies. What do you say?

Don't. Fragging is an injury and a stressed colony may not recover. Find and correct the cause first.

Key point Fragging is an injury.

4. Fragging tools and safety

Wear thick gloves and eye protection. Zoanthids and Palythoa can carry palytoxin, a toxin that can be lethal, so handle them under water and never heat or spray their rock.

Fragging tools and safety Do Don't Thick gloves and eye protection Cut or handle corals bare-handed Handle corals under water Lift zoanthids out unnecessarily Wash hands after, before eating Touch your eyes or face Remove zoanthid rock bagged in water Boil, microwave, steam or spray the rock ! Assume palytoxin Zoanthids and Palythoa can carry a deadly toxin

Tools. Bone cutters (coral cutters) cut most branching stony corals; curved-blade cutters handle thick branches without crushing them. A coral saw or band saw cuts thick skeletons. Scissors, a scalpel or a blade cut soft corals and zoanthids. Rinse tools in purified water after use and dry them: blades rust quickly in salt water.

Gloves and eye protection are worn whenever corals are cut or handled out of the water. Cutting can send water and pieces of skeleton flying.

Palytoxin. Zoanthids (Zoanthus) and Palythoa can contain palytoxin, a toxin that can be lethal (Module 2). There's no way to tell by looking which colonies carry it, and it can arrive unseen on live rock, so assume it's present. Wear thick rubber gloves that cover the forearms, not thin gloves that tear, and eye protection. Handle these corals under water wherever possible. Never pour boiling or hot water over rock with zoanthids on it, never microwave or steam-clean it, and never spray or scrub it under running water: these release the toxin into the air. If rock must come out, bag it in water first. Wash and dry your hands afterward, before eating, drinking or touching your face.

If someone is exposed, with burning eyes or skin, or breathing problems after handling zoanthids, rinse the area with plenty of fresh water, move them to fresh air, and get medical help at once.

If Then
Gear Thick gloves, eye protection.
Zoanthids Assume palytoxin.
Never Boil, microwave, steam or spray.

Check your understanding

A rock covered in unwanted Palythoa needs cleaning. A coworker plans to pour boiling water over it. What do you say?

Never. Heating releases palytoxin into the air, which can be lethal. Bag the rock in water and handle it with thick gloves and eye protection.

Key point Exposure: rinse, fresh air, medical help.

5. Fragging by coral type

Each coral type is cut differently: cutters for branching stony corals, a saw for large-polyp stony corals, scissors or a blade for soft corals and zoanthids.

Fragging by coral type Coral type How it's cut SPS, branching Bone cutters; curved for thick branches SPS, plating Snapped by hand or bone cutters LPS Saw; at least one head per frag Soft, zoanthids Scissors or blade; keep some substrate

SPS corals (small-polyp stony corals). Branching corals such as Acropora are cut with bone cutters, which give a cleaner cut and less tissue damage than snapping by hand; use curved-blade cutters on thick branches so they don't crumble. Plating corals such as Montipora caps can be snapped by hand or cut with bone cutters.

LPS corals (large-polyp stony corals) are best cut with a saw. Leave at least one whole head (polyp) on each frag, and don't crush the skeleton at its base. If bone cutters must be used, cut gently and make the frags large.

Soft corals and zoanthids. Leathers are cut with sharp scissors or a blade; mushrooms are cut with bone cutters. Zoanthid colonies are broken up with bone cutters, then cut smaller with scissors, keeping some of the rock or substrate under the polyps and cutting as little tissue as possible. Handle zoanthids with the precautions in section 4.

If Then
SPS Bone cutters.
LPS Saw; a head per frag.
Soft, zoanthids Scissors or blade.

Check your understanding

A coworker cuts a brain coral with bone cutters and crushes the skeleton. What should have been used?

A saw, leaving at least one whole head on each frag, without crushing the skeleton.

Key point Cut as little tissue as possible.

6. After the cut: mounting, dipping and recording

Photograph before and after, glue the frag by its base with a little gel glue, dip it, and watch it heal.

After the cut Photo before Parent and frag, ruler in frame Mount A little gel glue on the base Dip Every frag, as for new corals Photo after and watch Healing, color, growth

Photograph before and after. Photograph the parent colony and the frag, from above with a ruler in the frame, before cutting and right after mounting. The photos are the baseline: they show whether the parent healed, whether the frag is growing, and how much, and they show what changed if something goes wrong.

Mounting. Hard corals and many soft corals are glued to a frag plug, disk or piece of rubble with cyanoacrylate gel (gel super glue). Less is more: put a small amount on the plug and press the frag's skeleton or base into it, keeping glue off living tissue. Plugs suit branching SPS, disks suit encrusting corals and zoanthids. Glue won't hold on mushrooms and leathers, because their slime coat sheds it. Leather frags are held to a piece of rock with a rubber band, or wedged into the rockwork, until they attach. Mushroom frags are placed in a container with some substrate inside the tank, so the flow doesn't blow them around while they attach.

Dip every frag. A cut frag is dipped and inspected like any new coral before it goes into a system with other corals, because pests travel on frags (Module 23). Rinse tools between colonies.

Watch it heal. Check the frag and the parent daily for the first weeks: tissue covering the cut edge, polyps extending, color holding. Record what you see with the date.

If Then
Photos Before and after, ruler.
Glue A little, on the base.
Dip Every frag.

Check your understanding

Why photograph the frag before and after cutting?

The photos are the baseline: they show whether the parent healed and the frag grew, and what changed if something goes wrong.

Key point Watch it heal daily.

7. Growing giant clams

Giant clams grow from strong light, steady calcium and alkalinity, and food. Their growth is recorded as shell length.

Growing giant clams Need What it means Light Strong; maxima and crocea grow faster Calcium, alkalinity Steady; shells are built from them Food Phytoplankton suggested in this course's practice Footing T. gigas attach to rock, not sand

Giant clams host photosynthetic algae in their tissue and use the light for energy, but they also filter food from the water (Module 28). They build their shells from calcium and carbonate, so calcium and alkalinity are kept steady (Module 19).

Light. In this course's experience, T. maxima and T. crocea grow faster as light increases, up to a PAR of 500 (Module 18).

Food. Clams can live without being fed, but feed phytoplankton into the water column: in trials, fed clams grew faster than unfed clams, and systems differ in how many fish they hold (Module 28).

Footing. T. gigas attach to rock, not sand, so they're placed on a rock surface. Each clam's growth is recorded as shell length in millimeters from a top-down photo with a ruler in the frame (section 2). Clams grow slowly, so months of records are needed to see a trend.

If Then
Light Strong; up to PAR 500.
Food Phytoplankton suggested.
T. gigas On rock, not sand.

Check your understanding

A T. gigas is placed on the sand bed. What's wrong?

T. gigas attach to rock, not sand. Place it on a rock surface.

Key point Shell length in mm.

8. Spawning in the aquarium

Animals in a mature system may spawn. A spawning event can cloud the water and foul it, so it gets fresh carbon, fine filtration and a water change.

A spawning event Water turns cloudy Everything else normal ! A clue Anemone deflated, clams look off Respond Fresh carbon, micron filter, water change

Corals, clams, anemones and other invertebrates in a healthy, mature system may release eggs and sperm into the water.

Recognizing it. In this course's experience, cloudy water together with a deflated anemone, or with clams looking off, while everything else in the system is fine, points to a spawning event rather than a disease. Check the water and the animals before deciding.

Responding. Spawn decomposes and can foul the water. Add fresh activated carbon (Module 17), run fine filtration such as a canister filter with micron cartridges (Module 15) to catch the spawn, and do a matched water change (Module 32): when in doubt, do a water change. Watch the animals and the water until it clears.

If Then
Sign Cloudy water, all else normal.
Clue Anemone deflated, clams off.
Response Carbon, micron filter, water change.

Check your understanding

The water is cloudy one morning, the anemone is deflated, and everything else is normal. What's likely, and what do you do?

A spawning event. Add fresh carbon, run fine micron filtration, and do a matched water change; watch until it clears.

Key point When in doubt, a water change.

9. A system over the years

A reef system takes about two years to become stable and mature, and its biodiversity and food web need renewing to stay that way.

A system over the years Over time What this course does Biodiversity fades New quality live rock every 1 to 2 years Food web thins Varied foods, live plankton, bacteria Demand rises Dose pegged to alkalinity demand Numbers drift Stable beats perfect; don't chase

In this course's experience, a reef system takes about two years to become very stable and mature, and along the way it goes through a series of changes and outbreaks (Module 31).

Renewing biodiversity. In this course's practice, new high-quality live rock from the ocean is added every 1 to 2 years. It brings in new bacteria, small animals and other life that a closed system slowly loses (Module 9).

Feeding the food web. A variety of foods at different particle sizes, live plankton such as rotifers and several types of phytoplankton, and regular doses of beneficial bacteria support every level of the food web. The results are living plankton, animals spawning and reproducing, and very high biodiversity (Module 26).

Demand rises as animals grow. As clams and corals grow, they take up more calcium and alkalinity. In this course's practice, the supplement dose is set by alkalinity demand, so it's raised as demand rises, based on test results (Module 19).

Stable beats perfect. Stable, non-ideal numbers are far less harmful than constantly chasing ideal numbers and causing swings. Animals adapt to stable values (Module 6).

If Then
Mature About two years.
Renew Live rock every 1 to 2 years.
Demand Dose follows alkalinity.

Check your understanding

Alkalinity has been falling faster each month as the clams grow. What does this course do?

Raise the supplement dose to match the alkalinity demand, based on test results.

Key point Stable beats perfect.

10. Managing growth and change

As animals grow, they crowd, shade and fight each other, and equipment ages. Manage this with pruning, moving, chemical filtration and planned replacement.

Managing growth and change Crowding Prune, move or rehome Chemical warfare Poly-Filter and fresh carbon Shading Tall colonies block light Aging equipment Replace before it fails

Crowding. Corals that grow into each other sting and compete for space. Prune them by fragging, move a colony to a new spot, or rehome it, before they touch (Module 24).

Chemical warfare. Many corals and anemones release chemicals that harm their neighbors, called allelopathy, and larger colonies release more. When it's suspected, run Poly-Filter, a branded filter pad, and fresh activated carbon (Module 17).

Shading. As colonies grow taller and wider they shade the animals below them. Check light levels with a PAR meter as the aquascape changes, and move animals that are no longer getting enough light (Module 18).

Aging equipment. Pumps, heaters and other equipment wear out. Keep records of when each was installed, replace parts that wear on a schedule, and keep spares on the shelf (Module 33).

Review the records. Look back over the growth, test and maintenance records every few months. They show which animals are thriving, which have stalled, and what changed before a decline.

Fragging drill: on the course website this is an interactive drill. Something went wrong after a fragging session; check each step and correct every cause.

If Then
Crowding Prune, move, rehome.
Allelopathy Poly-Filter, fresh carbon.
Equipment Replace before it fails.

Check your understanding

Two coral colonies have grown until they nearly touch. What do you do before they do?

Prune one by fragging, move a colony, or rehome it, before they sting each other.

Key point Review the records.

11. Signs and responses

Growth unclear by eye Measure the same way at intervals.
Need to measure a clam Top-down photo with a ruler; in the water.
Anemone size Photo only; no size charted.
Pale, closed colony to frag Find the cause first; don't cut.
Zoanthid rock to clean Never boil or spray; bag in water.
Burning eyes after handling zoas Rinse, fresh air, medical help at once.
LPS to frag A saw; a whole head per frag.
Leather frag won't stay glued Rubber band it to rock until it attaches.
New frag ready Photo, glue the base, dip, watch.
Cloudy water, anemone deflated Spawning: carbon, micron filter, water change.
Alkalinity demand rising Raise the dose to match demand.
Colonies about to touch Prune, move or rehome.

Module 34 test

30 questions. Pass with 27 or more. Opens after you pass every section check in this module. Sign in to start.

Sources

  1. Bulk Reef Supply: how to frag and mount coral (cutters, saws, gel glue, plugs and disks)
  2. Bulk Reef Supply: top 12 tips for fragging SPS corals (gloves, eye protection, cutters)
  3. Bulk Reef Supply: top tips for fragging LPS corals (saws, one head per frag)
  4. Bulk Reef Supply: top 10 tips for fragging soft corals (glue on leathers and mushrooms; zoanthids)
  5. Reef Builders: tools for fragging corals (blades rust quickly)
  6. Ornamental Aquatic Trade Association: how to avoid palytoxin poisoning
  7. SA Health: palytoxin poisoning and marine aquarium safety
  8. James Fatherree: on the biology and mariculture of giant clams
  9. Estacion, Solis and Fabro (1986): effects of supplementary feeding on the growth of Tridacna maxima. Silliman Journal 33 (FAO abstract)
  10. Growth of cultured giant clams (Tridacna spp.) in low pH, high-nutrient seawater: effects of substrate and supplemental feeding. J. Mar. Biol. Assoc. UK 92(4)
  11. Michael Maddox, President of IMARCS: husbandry practice and observations